Create new Function Block Diagram and select (I/O=>OPC=>DA) new OPC DA module named "Server".
- Insert progID / IP Address of the Metso OPC DA Client as shown on the pic.
Create new Function Block Diagram and select new OPC DA module named "Group".
- Insert the known name from Server Initialization module as servername.
Create new Function Block Diagram and select new OPC DA module named "Input".
- Insert Servername known from Server Initialization also insert Groupname from OPC Group Configurationmodule.
- Insert Variable known from Somebytes SNMPVariableBuilder. (for Example SNMP/UPS1_AREA1/public/.1.3.6.1.2.1.33.1.2.2 (UPS on Battery since x secounds of one UPS))
HowTo use OPC-Netlistener with MetsoDNA OPC DA Client
-
- Posts: 1
- Joined: Thu Nov 19, 2009 1:16 pm
HowTo use OPC-Netlistener with MetsoDNA OPC DA Client
- Attachments
-
- OPC Input module
- MEASUERE.JPG (20.46 KiB) Viewed 7057 times